User's Manual

108 CHAPTER 4: DISCOVERING THE NETWORK
Tools > Network Discovery with nothing selected
With no subnets selected in the tree or map, select Network Discovery
from the tools menu. The Network Discovery wizard will be launched at
the first pane Discovery Type.
Tools > Network Discovery with a discovered subnet selected
If you select one or more discovered subnets in the map or the tree and
select Network Discovery from the tools menu, the Network Discovery
wizard will be launched at the Specify Subnets pane. (See Specify Subnets
Pane on page 111.) The subnets you selected will be included in the list
on this pane:
Figure 27 Specify Subnets Pane
The subnet mask and range information are also filled out. You can
modify the range information by selecting the appropriate subnet in the
list and clicking Edit. If you choose not to modify the range information
then the discovery operation will include all ranges that have currently
been added to that subnet. If you do modify the range then only the
ranges you specify will be used in the discovery operation. However, old
ranges will not be discarded, and you can still view them by launching the
properties dialog box against the subnet.
You can also start a Network Discovery by right-clicking on a discovered
subnet, and selecting Network Discovery. This has the same effect as
selecting Network Discovery from the Tools menu.