Specifications

Chapter 2 Preparing the HP NetServer
23
Post (4 Places)
Hole in Processor Tray
for LCD Cables
LCD Assembly
Figure 2-14. Attaching the LCD Assembly
(HP NetServer LXr 8500 Shown)
CAUTION When you attach the LCD assembly to the HP NetServer, be
careful not to pinch the LCD cables between the LCD
assembly and the front of the HP NetServer.
7. Position the slots on the rear half of the LCD cover over the posts on the
processor tray. Gently push the LCD assembly onto the posts and then
push the assembly firmly downward to attach it and engage the retaining
spring.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com