Installation guide

41
B Regulatory Information
DECLARATION OF CONFORMITY
according to ISO/IEC Guide 22 and EN 45014
Manufacturer’s Name: Hewlett-Packard Company
Address: 10955 Tantau Avenue
Cupertino, CA 95014 USA
declares, that the product
Product Name: Second Drive Cage
Model Number(s): D9158A
Product Options: N/A
conforms to the following Product Specifications:
Safety: IEC 950:1991+A1+A2+A3+A4/ EN 60950: 1992+A1+A2+A3+A4+A11
GB4943-1995
EMC: CISPR 22:1993+A1+A2/ EN 55022:1994+A1+A2 - Class B
1
EN 50082-1:1992 - Generic Immunity
IEC 801-2:1991, 4 kV CD, 8 kV AD
IEC 801-3:1984, 3V/m
IEC 801-4:1988, 0.5 kV Signal Lines, 1 kV Power Lines
FCC Title 47 CFR, Part 15
Supplementary Information:
1) The product was tested in a typical configuration with a Hewlett-Packard NetServer computer and
peripherals.
2) The product complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received, including interference that may cause
undesired operation.
The product herewith complies with the requirements of the following directives, and carries the CE-
mark accordingly:
o EMC Directive 89/336/EEC
o Low Voltage Directive 73/23/EEC
Cupertino, June 10, 1999
Erin McLaughlin NSD Regulatory Manager
North American Contact: Hewlett-Packard Company Product Regulation Manager, 3000 Hanover Street, Palo
Alto, CA 94304, USA [Telephone: [phone]]
European Contact: Your local Hewlett-Packard Sales and Service Office or Hewlett-Packard GmbH,
Department ZQ / Standards Europe, Herrenberger Straße 130, D-71034 Böblingen (FAX: + 49-7031-143143)