Manual

HP ProLiant NC1020 Cu Gigabit Server Adapter 32 PCI Single Port User Guide 1-1
1
Introduction
Adapter Overview
The HP ProLiant NC1020 Cu Gigabit Server Adapter is a 32-bit, 33/66MHz, single port,
Ethernet adapter that delivers up to 1000 Mb/s Ethernet over twisted-pair (copper) Category 5
or better cabling. The NC1020 Cu Gigabit Server Adapter has a fully integrated controller
capable of auto-negotiating a link at 10, 100, or 1000 Mb/s. The network connection is made
through an RJ-45 connector. LED indicators show the link and activity. The NC1020 Cu
Gigabit Server Adapter is a supported option for selected HP ProLiant servers. For best
performance, install the adapter in a 32-bit/33MHz or 32-bit/66MHz PCI slot.
For the latest functionality, features, and operating system support for this adapter, see the HP
website
(http://h18004.www1.hp.com/products/servers/networking/index-nic.html).
Hardware Overview
The NC1020 Cu Gigabit Server Adapter has one auto-negotiating 10/100/1000 RJ-45 port.
LED indicators show link and activity. Refer to Table 1-1 for descriptions of LED operations.