System information

Display assembly
NOTE: Each display assembly spare part kit includes 1 webcam, 1 microphone, 1 speaker box, and
2 WLAN antenna transceivers/cables.
NOTE: 10.1-inch display assembly components are not sold separately. The complete display
assembly is available as spare part number 509696-001 for the red-colored model or 507312-001 for
all other models.
NOTE: 10.2-inch display assembly components are not sold separately. The complete display
assembly is available as spare part number 512140-001 for the red-colored model, or 507310-001 for
all other models.
Description Spare part number
8.9-inch, WSVGA, BrightView 507309-001
10.1-inch standard-definition AntiGlare 507312-001
10.1-inch standard-definition AntiGlare (red-colored models) 509696-001
10.2-inch WSVGA AntiGlare 507310-001
10.2-inch WSVGA AntiGlare (red-colored models) 512140-001
10.2-inch WSVGA AntiGlare (Compaq Mini 700) 512143-001
See Display assembly components on page 16 for more spare part information.
Before removing the display assembly, follow these steps:
1. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device
on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the device.
3. Disconnect the power from the device by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the device.
4. Remove the battery (see
Battery on page 32).
5. Remove the following components:
a. Keyboard (see
Keyboard on page 35)
b. Hard drive or solid-state drive (see
Mass storage devices on page 37)
c. Top cover (see
Top cover on page 40)
Remove the display assembly:
58 Chapter 4 Removal and replacement procedures