- Hewlett-Packard Router User Guide

87Network Storage Router N1200 User Guide
4
Serial/Telnet User Interface
The Serial/Telnet User Interface (UI) is used to configure and manage the HP
StorageWorks Network Storage Router. This chapter describes the configuration
menus and option tasks available in the Serial/Telnet UI.
Note: Unless otherwise indicated, configuration changes take effect when the router
reboots.
During the start up process of the router, the Serial/Telnet UI displays initial
power-up messages. After the power-up process is completed, the Main Menu of
the UI is displayed. Within the router Main Menu, several configuration menus
and tasks are listed. All configuration and management tasks are performed from
these menus.
This chapter is organized using the same structure as the router Main Menu and its
associated submenus. The sections are:
■ Telnet UI Access, page 89
■ Serial UI Access, page 90
■ Power up Messages, page 91
■ Serial/Telnet UI Main Menu, page 92
■ Configuration Menu, page 93
■ Baud Rate Configuration, page 95
■ Ethernet Configuration, page 96
■ Fibre Channel Configuration, page 99
■ Parallel SCSI Configuration, page 103
■ Device Mapping, page 106
— Selecting the current map