QuickSpecs

QuickSpecs
HP MultiSeat Computing Solution
HP Compaq MultiSeat ms6000 Desktop Technical Specifications
DA – XXTBD Worldwide —Version 1 — November 2009
Page 6
DIMM Slot Population
1 (black)
2 (white) 3 (white)
4 (white)
2-GB (Dual Channel Symmetric)
1GB 1GB
6-GB
2GB 2GB 2GB
*The Intel Q43 Express chipset includes an integrated Management Engine (ME) micro-controller, which requires system
memory to support manageability functions. If the system memory configuration is single-channel or dual-channel
asymmetric, 16MB of system memory is pre-allocated for the ME at system startup. If the memory configuration is dual-
channel symmetric, 32 MB of memory is pre-allocated for the ME at system startup. This pre-allocated memory is not
available to the operating system, just as pre-allocated video memory is not available.
PCI slots
1 low-profile
Max power per slot
35W
PCIe x1 slot
2
Max power per slot
10W
PCIe x16 slot (also functions as
SDVO/ADD2 slot)
1 low-profile
Max power per slot
35W
External Bays
3.5"
1
5.25"
1
IDE
Internal 3.5" HDD Bays
1
Hard Drive Controller Supported
SATA
Hard Drive Interfaces Supported
SATA 3.0Gb/s
Media Card Reader
Quantity Supported
1 1
2
Position Supported
2 2
2,3
Controller
USB/Diskette
SATA SATA
NOTE: The SATA port labeled SATA3 on the system board can be enabled by the BIOS as an eSATA port. Using it for an
eSATA drive will require a separately purchased cable with an eSATA connector.
Hard Drive
One or two of these:
Essentials configuration: 320-GB SATA 3.0-Gb/s Hard Drive (16MB Cache,10,000 RPM, NCQ,
Smart III)
Extended configuration: 500-GB SATA 3.0-Gb/s Hard Drive (16MB Cache, 10,000 RPM,
NCQ, Smart III)
NOTE: NCQ functionality requires a user set-up BIOS setting.
Total Memory
Channel A
Channel B
Storage – Drive Support
5.25" Serial ATA Devices
3.5" Serial ATA Devices
Expandability