QuickSpecs

Processors
ProcessorsProcessors
Processors
One of these:
ms6000
ms6000ms6000
ms6000
Essentials configuration
Intel® Core™2 Duo E7500 (2.93 GHz, 3 MB L2 cache, 1066 MHz FSB)
ms6000
ms6000ms6000
ms6000
Extended configuration
Intel® Core™2 Quad Q9500 (2.83 GHz, 6 MB L2 cache, 1333 MHz FSB)
ms6005
ms6005ms6005
ms6005
Essentials configuration
AMD Athlon II X2 B26 (3.2 GHz, 2 MB L2l cache, HT bus 3.0)
ms6005
ms6005ms6005
ms6005
Extended configuration
AMD Phenom II X4 B97 (3.2 GHz, 8 MB total cache, HT bus 3.0)
ms6200
ms6200ms6200
ms6200
Essentials configuration
Intel® Core™ i5-2400 (3.10 GHz, 6 MB cache, 4 cores)
ms6200
ms6200ms6200
ms6200
Extended configuration
Intel® Core™ i7-2600 (3.40 GHz, 8 MB cache, 4 cores)
Memory
MemoryMemory
Memory Supports unbuffered non-ECC DDR3 SDRAM
Supports unbuffered non-ECC DDR3 SDRAMSupports unbuffered non-ECC DDR3 SDRAM
Supports unbuffered non-ECC DDR3 SDRAM
The Intel Q43 Express chipset supports unbuffered non-ECC DDR3 SDRAM (synchronous dynamic
random access memory) at a frequency of up to 1333MHz.
The Intel Q65 Express chipset supports unbuffered non-ECC DDR3 SDRAM (synchronous dynamic
random access memory) at a frequency of up to 1333MHz.
AMD processors support unbuffered non-ECC DDR3 SDRAM (synchronous dynamic random access
memory) at a frequency of up to 1333 MHz.
NOTE:
NOTE:NOTE:
NOTE: 1066MHz system memory frequency of operation requires at least PC3-8500 (DDR3-1066)
memory type for all populated memory modules, and an Intel processor with FSB (front side bus) of at
least 1066MHz.
System Memory upgrades are accomplished by adding DDR3 SDRAM module(s) to empty DIMM slots
on the System Board.
CAUTION:
CAUTION:CAUTION:
CAUTION: Voltage is supplied to the memory modules whenever the computer is connected to an active
AC outlet. Adding or removing memory modules while voltage is present may cause irreparable damage
to the memory modules or system board. The computer must be shut down with the AC power removed
(disconnect AC power cord at rear chassis or at AC outlet) prior to adding or removing SDRAM
modules.
HP recommends dual-channel symmetric configurations for the best memory performance. For dual-
channel symmetric performance, the total amount of memory in each channel must be equal. Do not
inter-mix memory module speeds or memory operating frequency will default to lowest speed.
QuickSpecs
HP MultiSeat Computing Solution
HP MultiSeat Computing SolutionHP MultiSeat Computing Solution
HP MultiSeat Computing Solution
HP MultiSeat ms6000/ms6005/ms6200 Series Desktop – Standard Features
DA - 13526 Worldwide — Version 8 — May 11, 2011 Page 4