Device Mapper Multipath Enablement Kit for HP StorageWorks Disk Arrays v4.3.1 release notes (AA-RWF9J-TE, November 2009)

NOTE:
• For more information on configuring iSCSI parameters, see Configuring iSCSI parameters.
• Device Mapper Multipath does not support coexistence with other multipath products.
• Device Mapper Multipath does not support Active-Passive Storage Arrays.
• HPDM Multipath Enablement Kit for HP StorageWorks Disk Arrays v4.3.1 does not support SAS
and CCISS devices on RHEL 5.4 and SLES 10 SP3.
• On SLES 11, Device Mapper Multipath for iSCSI devices is supported with kernel version 2.6.27.37-
0.1.1 or later
Installing Device Mapper Multipath tools
Ensure the following RPMs bundled with the operating system distributions are installed on the system:
• For RHEL 4 Update 7:
• device-mapper-1.02.25-2.el4 or later
• device-mapper-multipath-0.4.5-31.el4 or later
• For RHEL 4 Update 8:
• device-mapper-1.02.28-2.el4 or later
• device-mapper-multipath-0.4.5-35.el4 or later
• For RHEL 5 Update 2:
• device-mapper-1.02.24-1.el5 or later
• device-mapper-multipath-0.4.7-17.el5 or later
• For RHEL 5 Update 3:
• device-mapper-1.02.28-2.el5 or later
• device-mapper-multipath-0.4.7-23.el5 or later
• For RHEL 5 Update 4:
• device-mapper-multipath-0.4.7-30.el5 or later
• device-mapper-1.02.32-1.el5 or later
• For SLES 10 SP2:
• device-mapper-1.02.13-6.14 or later
• device-mapper-devel-1.02.13-6.14 or later
• multipath-tools-0.4.7-34.43 or later
• For SLES 10 SP3:
• device-mapper-1.02.13-6.14 or later
• device-mapper-devel-1.02.13-6.14 or later
• multipath-tools-0.4.7-34.50.10 or later
• For SLES 11:
• device-mapper-1.02.27-8.6 or later
• multipath-tools-0.4.8-40.4.1 or later
6