Device Mapper Multipath Enablement Kit for HP StorageWorks Disk Arrays v4.3.1 release notes (AA-RWF9J-TE, November 2009)

/etc/sysconfig/iscsi file depending on the number of LUNs, or run the multipath -v0

command after the reboot.

• On SLES 11 operating systems:

• Multipath may not always activate all partitions on reboot.

• The multipathd daemon may fail to stop immediately after it is started in large SAN config-

urations.

• The multipathd daemon may consume more memory in large SAN configurations.