Device Mapper Multipath Enablement Kit for HP StorageWorks Disk Arrays v4.3.0 release notes (AA-RWF9H-TE, June 2009)

Installing Device Mapper Multipath tools
Ensure the following RPMs bundled with the operating system distributions are installed on the system:
• For RHEL 4 Update 7:
• device-mapper-1.02.25-2.el4 or later
• device-mapper-multipath-0.4.5-31.el4 or later
• For RHEL 4 Update 8:
• device-mapper-1.02.28-2.el4 or later
• device-mapper-multipath-0.4.5-35.el4 or later
• For RHEL 5 Update 2:
• device-mapper-1.02.24-1.el5 or later
• device-mapper-multipath-0.4.7-17.el5 or later
• For RHEL 5 Update 3:
• device-mapper-1.02.28-2.el5 or later
• device-mapper-multipath-0.4.7-23.el5 or later
• For SLES 10 SP2:
• device-mapper-1.02.13-6.14 or later
• device-mapper-devel-1.02.13-6.14 or later
• multipath-tools-0.4.7-34.43 or later
• For SLES 11:
• device-mapper-1.02.27-8.6 or later
• multipath-tools-0.4.8-40.5 or later
Installing HPDM Multipath Enablement kit 4.3.0
To install HPDM Multipath 4.3.0, complete the following steps:
1. Download the HPDM Multipath Enablement Kit for HP StorageWorks Disk Arrays v4.3.0 available
at http://www.hp.com/go/devicemapper.
2. Log in as root to the host system.
3. Copy the installation tar package to a temporary directory (for example, /tmp/HPDMmul-
tipath).
4. Unbundle the package by executing the following commands:
#cd /tmp/HPDMmultipath
#tar -xvzf HPDMmultipath-4.3.0.tar.gz
#cd HPDMmultipath-4.3.0
5. Verify that the directory contains INSTALL, README.txt, COPYING, bin, SRPMS, conf, and
docs directories.
6. To install HPDM Multipath 4.3.0, execute the following command:
#./INSTALL
Device Mapper Multipath Enablement Kit for HP StorageWorks Disk Arrays v4.3.0 release notes 7