VISTA Plus for MPE Administrator's Guide

Chapter 2
2-2
Installation and Configuration for Windows Clients
Review the flow chart below for the installation order of VISTA Plus for Windows MPE. NBSpool
and VISTA Plus for MPE must be installed on the HP 3000. The VISTA Plus for Windows MPE
application must be installed on each Windows client that requires access to the reports on the HP
3000 server. Once these products are installed, several steps must be performed to configure the
VISTA Plus server to accept VISTA Plus for Windows MPE clients.
Overview of Steps for Installing and Configuring VISTA Plus
1. Install VISTA Plus for MPE on the HP3000 server.
2. Configure the server to accept Windows clients.
3. Configure folder profiles.
4. Add VISTA Plus users.
5. Enable VISTA Plus for Windows MPE.
6. Index folders for VISTA Plus for Windows MPE.
7. Start the VISTA Plus server.
8. Install VISTA Plus for Windows MPE on each Windows client.
Note. If you have already performed any of the steps listed above, you can skip that
step and go on to the next.
VISTA Plus for Windows MPE
VISTA Plus MPE Server
NBSpool