Using the Node Management Services (NMS) Utilities (MPE/iX 7.0, 7.5)

Chapter 5 87

Using NMMGR in Maintenance Mode

CARDCONF

Sets the current DTC card number so that the correct card is displayed

or updated by the READALLCONF, READCONF, UPDATECONF, and

WRITECONF commands.

Syntax

CARDCONF cardno

Parameters cardno A number corresponding to the slot number of the DTC

that contains the DTC card to be acted on. The number

must be between 0 and 5.

Description CARDCONF sets the current card number for a path referencing a DTC

card screen. If the current path identiﬁes a DTC conﬁguration, the

commands READALLCONF, READCONF, UPDATECONF, and WRITECONF

operate on data associated with a speciﬁc card in the DTC, as identiﬁed

by the CARDCONF command.

The CARDCONF command must be speciﬁed before a PATHCONF command

for a DTC card screen.

Example

NMMGR>

CARDCONF 1

(Sets the current DTC card number to 1.)

NMMGR>

PATHCONF DTS.DTCPC.SELECT.DTC01.CARD012

(Sets the current path to the data screen that contains data for cards 0,

1, and 2 of DTC01.)