Using the Node Management Services (NMS) Utilities (MPE/iX 7.0, 7.5)

78 Chapter5
Using NMMGR in Maintenance Mode
ADDLDEV
ADDLDEV
Adds LDEVs to a DTC card.
Syntax
{dtcname}
ADDLDEV {dtc-nodename} [filename]
{station-address}
Parameters dtcname The NMMGR nametag for the DTC
being accessed. The nametag is the last
name in the pathname of the DTC. For
example, the dtcname is DTC01 in the
pathname DTS.DTC.SELECT.DTC01.
The dtcname in a one to eight character
alphanumeric string.
dtc-nodename The nodename of the DTC that has
been configured at the DTC nametag
path. The name must conform to the
NODENAME.ORGANIZATION.DOMAIN
format. The name is a five to fifty
character alphanumeric string.
station-address The hexadecimal station of the DTC
being accessed.
filename A text file that contains the LDEVs to
be added or purged. The file name’s
format is:
filename[.groupname[.accountname]]
A file lockword may not be specified.
The contents of the file must be
formatted as described here.
Description This command adds LDEVs to the cards in the DTC’s configuration.
The first DTC found that matches the selection criteria will be operated
on. For example, this could occur if more than one DTC is configured
with the same station-address.
LDEVs for one of more cards can be entered on each invocation of this
command. If the filename is not specified you will be prompted with the
ADDLDEV> prompt. The format for each entry depends on the card type.
The formats for these card types are as follows:
• For direct connect or modem cards:
LDEV[,] cardno[,] portno[,] profilename[,]