Using the Node Management Services (NMS) Utilities (MPE/iX 7.0, 7.5)

286 AppendixA
NMS Error Messages
NMMGRVER Messages, Errors and Warnings
that each data screen in the configuration file has data associated with
it and that its data flag is set to Y. Run NMMGRVER again. If the same
error occurs again, check any accompanying error message and take the
action listed for it in this appendix. If this fails, submit a Change
Request. See “Submitting a CR” at the beginning of this appendix.
NMMGRVERERR
89
MESSAGE: Duplicate host luname (!) found in node !.
(NMMGRVERERR 89)
CAUSE: The configuration file contains an SNANODE that contains two
or more lus that have the same name. Only the first lu found is
converted. The other names are skipped, and the conversion will
continue.
ACTION: Use the same version of NMMGR that created it to modify the
unconverted configuration file. Delete the duplicate lu names or change
them to unique names and then convert the configuration file.
NMMGRVERERR
90
MESSAGE: Can’t find host luname. Nau = !, Node = !.
(NMMGRVERERR 90)
CAUSE: The host luname is not configured in the configuration file.
Therefore, this nau is not converted.
ACTION: Use the same version of NMMGR that created it to modify the
unconverted configuration file. Either delete the host luname or add the
host lu and then convert the configuration file.
NMMGRVERERR
91
MESSAGE: An error has occurred during LINK CONVERSION.
(NMMGRVERERR 91)
CAUSE: An error occurred during the LINK part of the conversion
process. The actual error is listed in an error message which should be
displayed along with this one.
ACTION: Restore a backup copy of the configuration file if possible. Use
the version of NMMGR that created the configuration file to make sure
that each data screen in the configuration file has data associated with
it and that its data flag is set to Y. Run NMMGRVER again. If the same
error occurs again, check any accompanying error message and take the
action listed for it in this appendix. If this fails, submit a Change
Request. See “Submitting a CR” at the beginning of this appendix.
NMMGRVERERR
92
MESSAGE: The default SNA/SDLC LINK physical path is 24; User
modification may be needed. (NMMGRVERERR 92)
CAUSE: The default physical path has been set to 24, which may be
correct for the given system.
ACTION: Run NMMGR, confirm this value, and modify it as needed.