Using the Node Management Services (NMS) Utilities (MPE/iX 7.0, 7.5)

Appendix A 283
NMS Error Messages
NMMGRVER Messages, Errors and Warnings
will continue if possible. NMMGRVERERR 76 will usually be displayed
along with this message.
ACTION: Note that the configuration file may have been changed.
Depending on which subsystem is involved, the invalid path may or
may not be deleted from the converted file. Restore a backup copy of the
configuration file if possible and run NMMGRVER again. If the error
still occurs, submit a Change Request. See “Submitting a CR” at the
beginning of this appendix.
NMMGRVERERR
76
MESSAGE: Attempting to continue conversion. (NMMGRVERERR 76)
CAUSE: This is used to inform the user that NMMGRVER is continuing
the conversion process.
ACTION: None.
NMMGRVERERR
77
MESSAGE: The default NS LINK physical path is 6/4.2; User
modification may be needed. (NMMGRVERERR 77)
CAUSE: The default physical path has been set to 6/4.2.
ACTION: Confirm that this value is correct for your system and modify
it with NMMGR if needed.
NMMGRVERERR
78
MESSAGE: The default DTS LINK physical path is 2/4.2; User
modification may be needed. (NMMGRVERERR 78)
CAUSE: The default physical path has been set to 2/4.2.
ACTION: Confirm that this value is correct for your system and modify
it with NMMGR if needed.
NMMGRVERERR
80
MESSAGE: An error has occurred during LINKCONF CONVERSION.
(NMMGRVERERR 80)
CAUSE: An error occurred during the LINKCONF part of the conversion
process. The actual error is listed in an error message which should be
displayed along with this one.
ACTION: Restore a backup copy of the configuration file if possible. Use
the version of NMMGR that created the configuration file to make sure
that each data screen in the configuration file has data associated with
it and that its data flag is set to Y. Run NMMGRVER again. If the same
error occurs again, check any accompanying error message and take the
action listed for it in this appendix. If this fails, submit a Change
Request. See “Submitting a CR” at the beginning of this appendix.
NMMGRVERERR
81
MESSAGE: An error has occurred during IMF CONVERSION.
(NMMGRVERERR 81)
CAUSE: An error occurred during the IMF part of the conversion
process. The actual error is listed in an error message which should be
displayed along with this one.