Using the Node Management Services (NMS) Utilities (MPE/iX 7.0, 7.5)

282 AppendixA
NMS Error Messages
NMMGRVER Messages, Errors and Warnings
action.
NMMGRVERERR
67
MESSAGE:
Unable to update data.
Path: !
Midasstat = !
(NMMGRVERERR 67)
CAUSE: Internal problem updating data in configuration file.
ACTION: Restore a backup copy of the configuration file if possible and
run NMMGRVER again. If the error still occurs, submit a Change
Request. See “Submitting a CR” at the beginning of this appendix.
Note: not user solvable. A qualified HP representative should check the
midasstat value to determine what the problem is and take appropriate
action.
NMMGRVERERR
70
MESSAGE: Error in MPE-V Phase I file. (NMMGRVERR 70)
CAUSE: An error occurred in the converting of the file from MPE V
phase I to MPE V phase II. The process of converting an MPE V
configuration file to an MPE/iX file includes checking whether the file is
NS I or NS II. If the file is NS I, NMMGR first converts it to NS II and
then to MPE/iX. This error message was generated because NMMGR
detected an error during the conversion from NS I to NS II.
ACTION: The configuration file may be corrupted. Restore a backup
copy of the configuration file if possible and run NMMGRVER again. If
the error still occurs, submit a Change Request. See “Submitting a CR”
at the beginning of this appendix.
NMMGRVERERR
72
MESSAGE: ** Converting MPE V Nsconf file to MPE/iX file **
CAUSE: This is an informative message.
ACTION: None.
NMMGRVERERR
73
MESSAGE: ** Converting MPE V Nmconfig file to MPE/iX file **
CAUSE: This is an informative message.
ACTION: None.
NMMGRVERERR
74
MESSAGE: ** Converting MPE/iX config file **
CAUSE: This is an informative message.
ACTION: None.
NMMGRVERERR
75
MESSAGE:
Invalid path found in source file.
Path: !
(NMMGRVERERR 75)
CAUSE: An invalid path was found in the source configuration file. The
path may have been created by an unofficial NMMGR tool. Conversion