Using the Node Management Services (NMS) Utilities (MPE/iX 7.0, 7.5)

280 AppendixA
NMS Error Messages
NMMGRVER Messages, Errors and Warnings
NMMGRVERERR
60
MESSAGE:
Unable to add path.
Path: !
Midasstat = !
(NMMGRVERERR 60)
CAUSE: An internal error occurred while adding the displayed path.
ACTION: Restore a backup copy of the configuration file if possible and
run NMMGRVER again. If the error still occurs, submit a Change
Request. See “Submitting a CR” at the beginning of this appendix.
Note: not user solvable. A qualified HP representative should check the
midasstat value to determine what the problem is and take appropriate
action.
NMMGRVERERR
61
MESSAGE:
Unable to add data.
Path: !
Midasstat = !
(NMMGRVERERR 61)
CAUSE: Internal error occurred while adding data to the displayed path.
ACTION: Restore a backup copy of the configuration file if possible and
run NMMGRVER again. If the error still occurs, submit a Change
Request. See “Submitting a CR” at the beginning of this appendix.
Note: not user solvable. A qualified HP representative should check the
midasstat value to determine what the problem is and take appropriate
action.
NMMGRVERERR
62
MESSAGE:
Unable to purge path.
Path: !
Midasstat = !
(NMMGRVERERR 62)
CAUSE: Internal error occurred while purging displayed path.
ACTION: Restore a backup copy of the configuration file if possible and
run NMMGRVER again. If the error still occurs, submit a Change
Request. See “Submitting a CR” at the beginning of this appendix.
Note: not user solvable. A qualified HP representative should check the
midasstat value to determine what the problem is and take appropriate
action.
NMMGRVERERR
63
MESSAGE:
Unable to purge data.
Path: !
Midasstat = !
(NMMGRVERERR 63)
CAUSE: Internal error occurred while purging data at displayed path.