Using the Node Management Services (NMS) Utilities (MPE/iX 7.0, 7.5)

254 AppendixA
NMS Error Messages
NMGR Error and Warning Messages
NMGRERR 307 MESSAGE: The current node name entry has been deleted by another
user. (NMGRERR 307)
CAUSE: The user attempted to delete or update a network address, or
path data, but another user who is modifying the same directory file
has just deleted the entry.
ACTION: Coordinate update activities with other user(s).
NMGRERR 308 MESSAGE: Duplicate IP address. (NMGRERR 308)
CAUSE: The user attempted to add a network address that already
exists in the current path report.
ACTION: Either choose a different network address, or make sure you
are updating the correct node name global/local setting.
NMGRERR 321 MESSAGE: Not enough room in the path report list for this addition.
(NMGRERR 321)
CAUSE: This is an informative message that is issued when the user
attempts to add or update a path in a very large path report list. This
can happen only on very large gateway nodes, such as a node with more
than 15 network addresses.
ACTION: See “Submitting a CR” at the beginning of this appendix.
(Request an expansion on the limit on path reports.)
NMGRERR 322 MESSAGE: Internal NMMGR error — corrupt path report list data.
(NMGRERR 322)
CAUSE: Severe error indicating an internal logic error.
ACTION: See “Submitting a CR” at the beginning of this appendix.
NMGRERR 323 MESSAGE: No directory file open. (NMGRERR 323)
CAUSE: Maintenance mode interface: An informative message that is
issued when a user gives a command prior to completing a successful
OPENDIR command.
ACTION: Open or create a directory file using OPENDIR, then reissue the
command.
NMGRWARN 324 MESSAGE: Cannot find this entry in the directory. (NMGRWARN 324)
CAUSE: Maintenance mode interface: An informative message that is
issued when no directory entry (either global, local, or neither — if no
;GLOBAL or ;LOCAL keyword given) could be found in the directory
matching the specified node name.
ACTION: Correct the node name.