Using the Node Management Services (NMS) Utilities (MPE/iX 7.0, 7.5)

Appendix A 249
NMS Error Messages
NMGR Error and Warning Messages
NMGRERR 267 MESSAGE: The node name must be configured first. (NMGRERR 267)
CAUSE: The node name was not configured.
ACTION: Go to the Main screen and configure the node name.
NMGRERR 268 MESSAGE: Missing IP address. (NMGRERR 268)
CAUSE: The user neglected to enter the IP address in the appropriate
field.
ACTION: Enter the IP address and try again.
NMGRERR 269 MESSAGE: You must enter a backup configuration file name.
(NMGRERR 269)
CAUSE: The user pressed the
Open Config or Create Config key with no
file name specified in the backup configuration file name field.
ACTION: Enter a valid file name in the backup configuration file name
field and press
Open Config or Create Config again.
NMGRERR 270 MESSAGE: Cannot open node information file for ADDVC or
PURGEVC. (NMGRERR 270)
CAUSE: NMMGR was unable to open the file whose name was specified
in the ADDVC or PURGEVC command, either because the file does not exist
or because a more serious file system error occurred.
ACTION: 1. The file name specified may not exist. Try the command
again with a file that exists.
ACTION: 2. A more serious file system error may have occurred. See the
accompanying file system error message for resolution.
NMGRERR 271 MESSAGE: You must open the configuration and directory files first.
(NMGRERR 271)
CAUSE: The user attempted to perform an ADDVC or PURGEVC command
without first opening the configuration and/or directory files.
ACTION: Open a configuration file with the OPENCONF command and a
directory file with the OPENDIR command.
NMGRERR 272 MESSAGE: The link exists, but its type is not correct for this NI.
(NMGRERR 272)
CAUSE: The user specified an existing link name on one of the custom
NI update screens. The selected link’s type was not correct; that is, a
LAPB type link was specified for an X.25 NI.
ACTION: Enter the name of a link with the correct type or delete the
link configuration.