Using the Node Management Services (NMS) Utilities (MPE/iX 7.0, 7.5)

246 AppendixA
NMS Error Messages
NMGR Error and Warning Messages
NMGRERR 240 MESSAGE: Data must be entered and Saved before continuing.
(NMGRERR 240)
CAUSE: While running guided configuration, the user tried to press Next
Screen without first pressing Update Data while at the path
SNANODE.nodename.
ACTION: Enter the correct data and press Update Data.
NMGRERR 250 MESSAGE: The NI Name must be specified. (NMGRERR 250)
CAUSE: At the Guided HP Configuration screen, the user attempted to
fine tune the parameters for an NI configuration without specifying the
NI name in the NI Name field.
ACTION: Enter a valid NI name in the NI Name field and press the
FineTune Parms key again.
NMGRERR 251 MESSAGE: The NI Name does not exist in the configuration file.
(NMGRERR 251)
CAUSE: The user attempted to perform an operation on an nonexistent
NI. Either the NI is not configured or the specified NI name is incorrect.
ACTION: Specify the correct NI name of a configured NI and try again.
NMGRERR 253 MESSAGE: The NI Name already exists and is of another type.
(NMGRERR 253)
CAUSE: The user attempted to create an NI using an NI name that has
already been configured for another NI of a different type.
ACTION: Specify an NI name that has not already been used and try
again.
NMGRERR 254 MESSAGE: This link name is used by another NI; select another
name. (NMGRERR 254)
CAUSE: While configuring an NI, the user specified a link name that has
already been configured for a different NI and cannot be shared.
ACTION: Specify a different link name and try again.
NMGRERR 255 MESSAGE: A link name must be entered. (NMGRERR 255)
CAUSE: The user attempted to update the configuration file without
specifying a link name, which is required for this screen.
ACTION: Enter a link name in the Link name field and try again.
NMGRERR 256 MESSAGE: This link cannot be renamed. It is used by another NI.
(NMGRERR 256)
CAUSE: The user attempted to change the name of a link that is used by
more than one NI.
ACTION: Leave the link name as it is or reconfigure one or the other of
the NIs to use a different link.