Using the Node Management Services (NMS) Utilities (MPE/iX 7.0, 7.5)

Appendix A 239
NMS Error Messages
NMGR Error and Warning Messages
NMGRERR 126 MESSAGE: IP Subnet Mask of 255.255.255 is not allowed.
(NMGRERR 126)
CAUSE: An IP Subnet Mask of 255.255.255 was entered. This is not a
legal mask.
ACTION: Reenter the mask with a different value.
NMGRERR 127 MESSAGE: If Node 2.1 Dependent LU Support, then LU #’s must be
blank. (NMGRERR 127)
CAUSE: If the PU Type is 2.1 and the PU Dependent Support is N, then
there cannot be any LU Numbers associated with the LU names.
ACTION: Make all the LU Numbers blank and try again.
NMGRERR 128 MESSAGE: Invalid SNA LU Name Format. Must be
XXXXXXXX.XXXXXXXX. (NMGRERR 128)
CAUSE: The user entered an invalid SNA LU name. The SNA LU Name
must be in the format of AXXXXXXX.AXXXXXXX, where A is any alpha
character and X in any alphanumeric character.
ACTION: Make all the LU Numbers blank and try again.
NMGRERR 130 MESSAGE: No previous page. (NMGRERR 130)
CAUSE: The user pressed the
PREV PAGE function key on a paged data
screen and there was no previous page of data.
ACTION: None.
NMGRERR 131 MESSAGE: Ldev of ! is not valid. Valid range is -1 to 4679.
(NMGRERR 131)
CAUSE: The user entered an Ldev that is out of range.
ACTION: Reenter an Ldev within the allowed range.
NMGRERR 132 MESSAGE: Names can only be 16 characters long. (NMGRERR 132)
CAUSE: The user entered a name in a field that allows more characters
than a valid name allows. This field is usually used for more than one
type of entry. The program believes that the user is trying to store a
name that is too long.
ACTION: Enter a new name 16 characters or shorter.
NMGRERR 133 MESSAGE: Allowed name chars are “A”..“Z”, “0”..“9”, “_” and “-”.
(NMGRERR 133)
CAUSE: The user has tried to enter a name with invalid characters in it.
ACTION: Enter a name with valid characters.
NMGRERR 134 MESSAGE: IP Address with node portion of zero’s reserved.
(NMGRERR 134)
CAUSE: The node portion of the IP address is all zeros.