Using the Node Management Services (NMS) Utilities (MPE/iX 7.0, 7.5)

206 AppendixA
NMS Error Messages
NM Error Messages
CAUSE: An internal error occurred.
ACTION: See “Submitting a CR” at the beginning of this appendix.
NMERR 157 MESSAGE: DS/LDM open request failed. (NMERR 157)
CAUSE: The request to open the DC/LDM failed. Returned by
NMOPENLINK. Bad software installation.
ACTION: Make sure that the versions of NMS software and port
translator software are compatible. See “Invalid Software Installation”
at the beginning of this appendix.
CAUSE: An internal error occurred.
ACTION: See “Submitting a CR” at the beginning of this appendix.
NMERR 158 MESSAGE: DS/LDM close request failed. (NMERR 158)
CAUSE: The request to close the DC/LDM failed. Returned by
NMCLOSELINK. Bad software installation.
ACTION: Make sure that the versions of NMS software and port
translator software are compatible. See “Invalid Software Installation”
at the beginning of this appendix.
CAUSE: An internal error occurred.
ACTION: See “Submitting a CR” at the beginning of this appendix.
NMERR 159 MESSAGE: Unable to lock the Link Manager port DST. (NMERR 159)
CAUSE: Returned by NMOPENLINK.
ACTION: Call to procedure failed.
CAUSE: Bad software installation.
ACTION: Make sure that the versions of NMS software are compatible.
CAUSE: An internal error occurred.
ACTION: See “Submitting a CR” at the beginning of this appendix.
NMERR 160 MESSAGE: Number of parameters exceeds maximum of 20.
(NMERR 160)
CAUSE: Returned after entering LINKCONTROL command incorrectly.
ACTION: Check the parameters against the LINKCONTROL syntax. Try
again.
NMERR 161 MESSAGE: Expects link name parameter. (NMERR 161)
CAUSE: Returned after entering LINKCONTROL command incorrectly.
ACTION: Specify the link name parameter and try again.