Using the Node Management Services (NMS) Utilities (MPE/iX 7.0, 7.5)

Appendix A 201
NMS Error Messages
NM Error Messages
NMERR 97 MESSAGE: Unable to find port for NMFILE process. (NMERR 97)
CAUSE: Returned by all NMCONF procedures. Error detected on
DICTSEND.
ACTION: See “Submitting a CR” at the beginning of this appendix.
NMERR 100 MESSAGE: Subsystem does not support version checking.
(NMERR 100)
CAUSE: Returned by NMVERSCHECK. Coding error by caller of
NMVERSCHECK. The
SUBSYSID parameter must refer to a subsystem
number that has a second level version cross check routine.
ACTION: See “Invalid Software Installation” at the beginning of this
appendix.
NMERR 101 MESSAGE: Fix levels differ in one or more modules. (NMERR 101)
CAUSE: There is a version mismatch between the various modules of
the subsystem. Incorrect installation of the subsystem software.
ACTION: See “Invalid Software Installation” at the beginning of this
appendix.
NMERR 102 MESSAGE: Update levels differ in one or more modules. (NMERR 102)
CAUSE: There is a version mismatch between the various modules of
the subsystem. Incorrect installation of the subsystem software.
ACTION: See “Invalid Software Installation” at the beginning of this
appendix.
NMERR 103 MESSAGE: Version levels differ in one or more modules.
(NMERR 103)
CAUSE: There is a version mismatch between the various modules of
the subsystem. Incorrect installation of the subsystem.
ACTION: See “Invalid Software Installation” at the beginning of this
appendix.
NMERR 104 MESSAGE: One or more subsystem modules are missing.
(NMERR 104)
CAUSE: A module required for normal operation of the subsystem is
missing.
ACTION: See “Invalid Software Installation” at the beginning of this
appendix.
NMERR 105 MESSAGE: One or more subsystem modules are invalid.
(NMERR 105)
CAUSE: An error has occurred trying to read the version ID of one or
more of the subsystem’s modules. An I/O error, disk error, or similar has
prevented reading the version stamp correctly.