Using the Node Management Services (NMS) Utilities (MPE/iX 7.0, 7.5)

200 AppendixA
NMS Error Messages
NM Error Messages
NMERR 88 MESSAGE: Parameter not aligned properly. (NMERR 88)
CAUSE: Internal error by the calling subsystem.
ACTION: See “Submitting a CR” at the beginning of this appendix.
NMERR 90 MESSAGE: Invalid path type value, must be 1 or 2. (NMERR 90)
CAUSE: Returned by NMCONFNEXTPATH. NMCONFNEXTPATH
detected invalid path type value. Internal error by the calling
subsystem.
ACTION: See “Submitting a CR” at the beginning of this appendix.
NMERR 92 MESSAGE: Unable to purge datafile. (NMERR 92)
CAUSE: Returned by NMCONFPURGE NMOPENTRACE. File system
error.
ACTION: Try to purge the file from a CI session, and note the error.
Correct this and retry.
NMERR 94 MESSAGE: No identifiers beyond this point in datafile. (NMERR 94)
CAUSE: Returned by NMCONFNEXTPATH.NMFILE detected warning
NMFSWARN 23, in MIDASNEXTPATH. This may not be an error if
the caller’s intention is to search the data file. Otherwise it might
indicate corruption of the file.
ACTION: If file corruption is suspected, see “Corrupt Configuration File”
at the beginning of this appendix. If this is not a problem, it may be due
to incompatible software modules, or an internal error by the calling
subsystem. See “Version Incompatibilities” and “Submitting a CR” at
the beginning of this appendix.
NMERR 95 MESSAGE: Read truncated to capacity of buffer. (NMERR 95)
CAUSE: Returned by NMCONFGETDATA. NMFILE detected
NMFWARN 19 on MIDASGETDATA. This is probably an internal error
by the calling subsystem.
ACTION: See “Submitting a CR” at the beginning of this appendix.
NMERR 96 MESSAGE: File code mismatch. (NMERR 96)
CAUSE: Returned by NMCONFOPEN. NMFILE detected
NMFSWARN 6 on MIDASOPEN. The file is not a valid configuration
file.
ACTION: Type LISTF <filename>, 1 on the file. The file type should be
type NCONF.
CAUSE: Internal error.
ACTION: See “Submitting a CR” at the beginning of this appendix.