Using the Node Management Services (NMS) Utilities (MPE/iX 7.0, 7.5)

Appendix A 195
NMS Error Messages
NM Error Messages
NMERR 56 MESSAGE: Invalid infolen, must be in range: 1 <= infolen <= 8.
(NMERR 56)
CAUSE: Returned by: NMCONFFILEINFO.
ACTION: See “Submitting a CR” at the beginning of this appendix.
NMERR 57 MESSAGE: Duplicate identifier already exists. (NMERR 57)
CAUSE: Returned by NMCONFADDPATH, NMCONFRENAMEPATH.
NMFILE detected NMFSERR 21 on MIDASADDPATH. User of
configuration program entered erroneous information.
ACTION: Enter correct data specifications.
CAUSE: Configuration database has internal error.
ACTION: See “Corrupt Configuration File” at the beginning of this
appendix.
CAUSE: Internal software error.
ACTION: See “Submitting a CR” at the beginning of this appendix.
NMERR 58 MESSAGE: Unable to find identifier in path name. (NMERR 58)
CAUSE: Returned by NMCONFGETDATA, NMCONFADDPATH,
NMCONFPURGEPATH,NMCONFNEXTPATH,NMCONFADDDATA,
NMCONFUPDATEDATA NMCONFDATALENGTH,
NMCONFRENAMEPATH,NMCONFPURGEDATA. NMFILE detected
message NMFSERR 9. User of configuration program or caller of
procedure entered erroneous pathname.
ACTION: Enter correct pathname.
CAUSE: Configuration file internal error.
ACTION: See “Corrupt Configuration File” at the beginning of this
appendix.
CAUSE: Internal error.
ACTION: See “Submitting a CR” at the beginning of this appendix.
NMERR 59 MESSAGE: Path depth < minimum or > maximum allowed.
(NMERR 59)
CAUSE: Returned by NMCONFNEXTPATH. Procedure received a path
depth < 0, or > 256. Returned by: NMCONFADDDATA,
NMCONFUPDATEDATA, NMCONFGETDATA,
NMCONFDATALENGTH, NMCONFPURGEDATA,
NMCONFRENAMEPATH, NMCONFPURGEPATH,
NMCONFADDPATH. Procedure received a path depth < 1, or > 256.
Internal error in the calling program
ACTION: See “Submitting a CR” at the beginning of this appendix.