Using the Node Management Services (NMS) Utilities (MPE/iX 7.0, 7.5)

Appendix A 187
NMS Error Messages
NM Error Messages
NM Error Messages
NMERR 1 MESSAGE: Invalid parameter specified. (NMERR 1)
CAUSE: The caller of an NMS procedure has passed an invalid value for
one or more of the parameters.
ACTION: See “Submitting a CR” at the beginning of this appendix.
NMERR 2 MESSAGE: Invalid SubsystemID parameter. (NMERR 2)
CAUSE: The caller of an NMS procedure has passed an invalid value for
the parameter
SubsystemID . Returned by NMOPENTRACE,
NMOPENLOG, NMGETTRACEID, NMVERSCHECK. This is usually
an internal error in the calling subsystem.
ACTION: See “Submitting a CR” at the beginning of this appendix.
NMERR 3 MESSAGE: Invalid UserID parameter. (NMERR 3)
CAUSE: The caller of an NMS procedure has passed an invalid value for
the parameter UserID . Returned by NMOPENTRACE,
NMGETTRACEID. This is usually an internal error in the calling
subsystem.
ACTION: See “Submitting a CR” at the beginning of this appendix.
NMERR 5 MESSAGE: Invalid TraceElement parameter. (NMERR 5)
CAUSE: The caller of an NMS procedure passed an invalid value to the
TraceElement parameter. Returned by NMOPENTRACE,
NMGETTRACE. This is usually an internal error in the calling
subsystem.
ACTION: See “Submitting a CR” at the beginning of this appendix.
NMERR 6 MESSAGE: Invalid Dest parameter. (NMERR 6)
CAUSE: The caller of an NMS procedure passed an invalid value to the
Dest parameter. Returned by NMOPENTRACE. This is usually an
internal error in the calling subsystem.
ACTION: See “Submitting a CR” at the beginning of this appendix.
NMERR 7 MESSAGE: Invalid TraceID parameter. (NMERR 7)
CAUSE: The caller of an NMS procedure passed an invalid value to the
TraceID parameter. Returned by NMWRITETRACE,
NMCLOSETRACE. This is usually an internal error in the calling
subsystem.
ACTION: See “Submitting a CR” at the beginning of this appendix.