Using the Node Management Services (NMS) Utilities (MPE/iX 7.0, 7.5)

Chapter 7 159
NMDUMP
Formatting Options
See Table 7-5 for a description of filter sets.
Table 7-5 Filter Sets
Subsystem Number Filter Description
SDLC 1 Data frames
sent/rcvd
Enables printing of frames sent and frames received
on the datacomm link.
2 Driver
message
sent/rcvd
Enables printing of all port messages sent to the
driver by SNA Transport and other entities, or sent
to them by the driver.
3 Driver
state-change
s
Enables printing of changes in internal state within
the SDLC driver modules.
4 Driver
intervals
Enables printing of details related to internal
processing of internal driver requests, mainly those
related to utility functions (not datacomm I/O).
55 Card
footprint
Enables printing of large blocks of footprint
information from the downloaded SDLC firmware.
99 ALL Produces a full trace.
0 Errors Only Disables all filter sets and produces a listing of error
only.
X25 0 Set Defaults Set all options back to default.
1 VC Number Select Virtual Circuit numbers
2 Packet Type Select Packet types.
3 Q-Bit Toggles between ON and OFF selection of Q-bit
(Control bit)