Troubleshooting Terminal, Printer, and Serial Device Connections - Edition 5 (32022-90058)

TermDSM Messages
Appendix A
90
ACTION: Contact your HP support representative.
(TDSM 38) MESSAGE: The data area is longer than TermDSM's dump buffer. (TDSM 38)
CAUSE: Internal error.
ACTION: Contact your HP support representative.
(TDSM 39) MESSAGE: TermDSM never received a reply to its dump data area request. (TDSM 39)
CAUSE: Internal error.
ACTION: Contact your HP support representative.
(TDSM 42) MESSAGE: You must have high (1) security to perform this function. (TDSM 42)
For level 1, you need SM or DI capability.
CAUSE: You do not have the correct user capabilities to use this function.
ACTION: Logon as a user with the correct capabilities for the TermDSM functions you
wish to use. Refer to Chapter 4, “TermDSM Commands,” for the security levels of each
command and subcommand.
(TDSM 43) MESSAGE: You can’t do this from your own DTC. Please run TermDSM from another
DTC or from the console. (TDSM 43)
CAUSE: If you were permitted to selftest, dump, or reset the DTC to which you are logged
on, your session would be aborted and you would be unable to get the test results.
ACTION: Move to a terminal on another DTC or the system console to run TermDSM.
(TDSM 44) MESSAGE: Warning: This will reset all users on that DTC. (TDSM 44)
CAUSE: If you continue, all user sessions on this DTC will be aborted.
ACTION: If you want to continue, you should alert all the users that their sessions will be
aborted.
(TDSM 45) MESSAGE: Warning: This will reset all users on that SNP. As many as 256 virtual
circuits could be affected. (TDSM 45)
CAUSE: If you continue, all user sessions on this SNP will be aborted.
ACTION: If you want to continue, you should alert all the users that their sessions will be
aborted.
(TDSM 46) MESSAGE: That virtual port number was not found. Please choose a port number
from this list: (TDSM 46))
CAUSE:
The virtual port number entered in the STATUS command was not valid.
Ether the incorrect number was entered or the connection is no longer
established
.
ACTION:
Termdsm will redisplay the connectivity list. Check the virtual port
number and reenter the STATUS command with the correct number.
(TDSM 49) MESSAGE: Warning: This will abort all users on that MUX. As many as 24 users could
be affected. (TDSM 49)
CAUSE: If you continue, all user sessions on this asynchronous processor board (mux
card) on the DTC 72MX will be aborted.
ACTION: If you want to continue, you should alert all the users that their sessions will be
aborted.