Troubleshooting Terminal, Printer, and Serial Device Connections - Edition 5 (32022-90058)

TermDSM Commands
X25SITE
Chapter 4
84
MAP
The MAP command displays the X.25 Active Site Network table. This table lists all the
NS links that are configured through all the DTCs that the system is managing.
Security level: 2.
Syntax
M[ap]
Description
When this command is executed, TermDSM will query all the X.25 cards in all DTC that
are being managed by the system and generate a table that lists the following
information:
• The node name of the MPE/iX system that is managing this link (the name may be
truncated)
• The node name of the MPE/iX system that is managing this link (the name may be
truncated)
• The DTC node name and the board that is configured for the link (the name may be
truncated)
The MAP command displays the output as follows:
X.25 Active Site Network
Netwk# System Node Name Link Name DTC Node Name Board#
===========================================================================
001 SYSTEMA.DOMAIN.ORG X25LINK1 DTSDTC01.DOMAIN.ORG 0001
002 SYSTEMB.DOMAIN.ORG X25LINK2 DTSDTC02.DOMAIN.ORG 0001
Each entry is identified by a Network number. This network number is used in the LIST
subcommand to specify which network connectivity list to be displayed.
LIST
The LIST subcommand displays the Connectivity List table for the selected network
which contains information on all the connections that are currently established through
the Network Link.
Security level: 2.
Syntax
LI[st] netwk
Parameter
Parameter
netwk
This is the number that is displayed for each link in the Active Site
Network table by the MAP subcommand.