Troubleshooting Terminal, Printer, and Serial Device Connections - Edition 5 (32022-90058)

TermDSM Commands
T[RACE]
Chapter 4
81
Please enter a filename for the X.25 trace or press carriage
return to use the default (TRACE.PUB.SYS). Trace file will be
kept in PUB.SYS.
(carriage return to accept default) ?
Trace Option 2 Use trace option 2 to trace level 2 information for the specified SNP
card. When this trace option is entered, the following prompt is printed on the terminal:
(filter)
HDr (Header only)
FUll (Full Packet)
(carriage return to exit) ?
Enter HDr if you want only header information (including TCP/IP headers) included in
the trace.
Enter FUll if you want full packet information included in the trace.
You will then be prompted to enter a trace file name, as follows:
(Filename)
Please enter a filename for the X.25 trace or press carriage
return to use the default (TRACE.PUB.SYS). Trace file will be
kept in PUB.SYS.
(carriage return to accept default) ?
Trace Option 3 Use trace option 3 to trace level 3 information for the specified SNP
card. When this trace option is entered, the following prompt is printed on the terminal:
(VC type for level 3)
PAd PAD VCs)
SYs (System-to-System VCs)
All (PAD and System-to-System VCs)
(carriage return to exit) ?
Enter PAd to trace PAD VCs only, enter SYs to trace system-to-system VCs only, enter
All to trace both PAD and system-to-system VCs.
You will then be asked to enter the link name, as follows:
(linkname)
Please enter the linkname for level 3 trace