Troubleshooting Terminal, Printer, and Serial Device Connections - Edition 5 (32022-90058)

TermDSM Commands
S[TATUS]
Chapter 4
72
S[TATUS]
Obtains information about DTC or port configuration and the state of the DTC or port.
Security level: 2.
Syntax
S[TATUS]
Description
After the STATUS command is entered, the following prompt is printed on the terminal:
(status)
DTc #
POrt #,#,#
SNp #,# ,#X.25 options - 1:Global, 2:level2,
3:level3, 4:PAD)
Vc #,#,#
(carriage return to exit) ? <F255P255>
These subcommands will display the status for the selected component or connection.
The following pages describe these two options. The STATUS subcommands DO NOT
affect the operation of the system, DTCs, or ports.
If you press
[Return]
instead of one of the subcommands, you will be returned to the
major prompt and then may enter another TermDSM command.
S[TATUS] DT[C]
Obtains configuration and status information about a particular DTC.
Security level: 2.
Syntax
DT[C] dtcnum
Parameter
dtcnum
This is the number TermDSM associates with a particular DTC. The
DTC command lists each DTC with its assigned number. This is also
printed when you make a mistake while typing in a DTC number.
Description
When this subcommand is entered, a large amount of information related to the DTC is
printed on the terminal.