Troubleshooting Terminal, Printer and Serial Device Connections - Edition 4 (32022-90030)

Chapter 4 81
TermDSM Commands
S[TATUS]
S[TATUS]
Obtains information about DTC or port configuration and the state of
the DTC or port.
Security level: 2.
Syntax
S[TATUS]
Description
After the STATUS command is entered, the following prompt is printed
on the terminal:
(status)
DTc #
POrt #,#,#
SNp #,#,# X.25 options - 1:Global, 2:level2,
3:level3, 4:PAD)
Vc #,#,#
(carriage return to exit) ? <F255P255>
These are the subcommands that can then be entered. The following
pages describe these two options. Neither of the STATUS subcommands
affect the operation of the system, DTCs, or ports.
If you press
[Return] instead of one of the subcommands, you will be
returned to the major prompt and then may enter another TermDSM
command.