System Startup, Configuration, and Shutdown Reference Manual (32650-90907)

Chapter 6
Modifying Logging Configurations
Entering the LOG Configurator
126
Entering the LOG Configurator
To access the LOG configurator, enter the LOG command (abbreviated LO) at the SYSGEN prompt as shown in
the Example 6-1:
Example 6-1 Activating the LOG Configurator
sysgen>LOG
** LOG configurator commands **
show (sh) slog (sl) ulog (ul)
clear (cl)(c) exit (ex)(e) help (he)(h) hold (ho)
oclose (oc) redo
log>
Using the LOG Configurator Help Facility
The help facility enables you to quickly identify the function and syntax of those LOG configurator commands
and options for performing the multiple operations that define or change logging processes.
To obtain a list of the commands available for use in the LOG configurator, enter HELP at the LOG
configurator prompt as shown in Example 6-2.
Example 6-2 LOG Configurator Help
log>HELP
** LOG configurator commands **
show (sh) slog (sl) ulog (ul)
clear (cl)(c) exit (ex)(e) help (he)(h) hold (ho)
oclose (oc) redo
log>
To display the syntax for each available command, enter HELP ALL as shown in Example 6-3.
Example 6-3 LOG Configurator HELP ALL
log>HELP ALL
command (abb) parameter=value
------------- ---------------
show (sh) [command = SLOG|ULOG|ALL]
[dest = OFFLINE]
slog (sl) [on = event#,...]
[off = event#,...]
ulog [nlogprocs = number processes allowed]
[usersperproc = users per logging process]
log>
Entering HELP commandname provides help for a specific command: