System Startup, Configuration, and Shutdown Reference Manual (32650-90892)

58 Chapter3
System Startup Functions
Reading Nonvolatile Memory (NVM)
to produce the local time, displayed on the console.
To read or set the hardware clock, enter:
ISL> clkutil
The system responds with the following banner:
SYSTEM FOR ISL STAND ALONE UTILITIES. [IHO, SPU LAB]
Version 1.0
****************************************************************
****** ******
****** CLKUTIL ******
****** ******
****** (C) Copyright Hewlett-Packard Co 1987, 1988, 1990 ******
****** All Rights Reserved ******
****** ******
****** HP shall not be liable for any damages resulting ******
****** from the use of this program. ******
****** ******
****** Version A.02.00 ******
****** ******
****************************************************************
To read the clock, enter r at the CLKUTIL prompt:
enter command : (r) read clock, (s) set clock (e) exit> r
The system responds with a message similar to the following:
THU, SEP 16, 1999, 7:06:08 PM
To set the clock, enter s at the CLKUTIL prompt:
enter command : (r) read clock, (s) set clock (e) exit> s
The system responds with a message similar to the following:
Enter Date MM/DD/YYYY
11/16/2000
When the enter date prompt appears, enter the date in the correct format: mm is a
two-digit number, 1–12, representing the month; dd is a two-digit number, 1–31,
representing the day of the month; and yyyy is a four-digit number representing the year.
(You can also enter just the last two digits for the year.)
The system continues by issuing the following prompt:
Enter Time HH:MM:SS
19:12:00
Enter the time using Greenwich Mean Time in 24-hour format.
The system requests verification of the adjusted date and time by issuing a message