System Startup, Configuration, and Shutdown Reference Manual (32650-90892)

222 AppendixF
Adding Peripherals to a System
N-Class and A-Class Systems
N-Class and A-Class Systems
These systems an address consisting of the bus converter number, the device adapter
number, and the device address, and some SCSI devices are supported.
Bus Converters
To configure bus converter:
io> ap 1 PAT_IOA_BC
io> ap 1/0 id=PAT_PCI_BC
io> ap 1/0/0 id=PCI_DEVICE
Device Adapter
To configure a device adapter with an address of 3 to the channel adapter module
identifier:
io> ap 1/0/0/0 id=A5150A
where nnnnn is a device adapter identifier such as HP28616A.
SCSI Devices
To configure a SCSI device you must use the word PSEUDO as the identifier:
io> ap 1/0/0/0.6 id=PSEUDO
io> adev 14 1/0/0/0.6.0 ST39103LC class=(DISC,SPOOL)