System Debug Reference Manual (32650-90888)

526 Chapter13
Standalone Analysis Tool (SAT)
Operating SAT
CM>CO Return to Console mode
Processor Dependent Code (PDC) Revision 3
Console Path = 8.1.0.0.0.0.0
Primary boot Path = 8.0.0.0.0.0.0
Alternate boot path = 8.2.3.0.0.0.0
Autoboot from primary path enabled.
To override, press any key within 10 seconds.
10 seconds expired -- proceeding with autoboot.
Booting from primary boot path = 8.0.0.0.0.0.0
Console IO Dependent Code (IODC) revision 3
Boot IO Dependent Code (IODC) revision 3
Soft Booted.
MMSAVE Version 9.60
DUMPAREA found, save main memory to disk
ISL loaded
ISL Revision 2634 August, 1986
3. Invoke SAT from the ISL interface.The following output is a sample SAT session:
TIP ISL> SAT
MPE/XL launch facility
Initialize_genesis - Version : <<870204.1552>>
TUE, MAY 16, 1989, 3:35:13 PM (y/n)? y
[TMUX_DAM] 19 7 8 2
Initialize memory manager completed.
SAT/XL A.00.13 Copyright Hewlett-Packard Co. 1987. All rights
reserved.
Locating LIF file: DUMPAREA
LIF file: DUMPAREA Ldev: 1 Sector: 477744 Length: 65536
Configuring disk drives
Configuring Path 8.0.1 as Ldev 2
Configuring complete
Initialize system related information
Hardware Model: Series 930
Last CPU PIM:
PC = a.ad8ac
General Registers
-----------------
R 0/00000000 fd3c336b 00160d20 c7400380 c7400380 c7400380 00007ffd
40000000
R 8/00000002 c7400380 c7400380 c7400380 c7400380 00000001 80000000