System Debug Reference Manual (32650-90888)

Chapter 4 117
System Debug Command Specifications :-Exit
DELETExxx
DELETE xxx
Delete various items. These are predefined aliases for other commands.
Syntax
DELETEB alias for BD
DELETEALIAS alias for ALIASD
DELETEERR alias for ERRD
DELETEMAC alias for MACD
DELETEVAR alias for VARD
See the ALIASINIT command.
DEMO
Privileged Mode
Adds/deletes/lists terminals used for demonstrating System Debug.
Syntax
DEMO
DEMO LIST
DEMO ADD
ldevs
DEMO DELETE ldevs
The DEMO command is used for giving demonstrations of System Debug. With this
command, the user is able to enslave up to 50 terminals. Each of the enslaved terminals
receives all input and output generated by System Debug. Output generated by the CI
through the use of the ":" command or CIGETVAR and CIPUTVAR functions is not sent to
the enslaved terminals.
Please read and heed the warnings listed in "Limitations, Restrictions."
Parameters
DEMO List the terminal LDEV's that currently are receiving System Debug I/O.
DEMO LIST Both command forms are identically supported.
DEMO ADD This keyword tells System Debug to add the following LDEVs to the list of
terminals to receive a copy of all System Debug I/O.
DEMO DELETE This keyword tells System Debug to remove the following LDEVs from the
list of terminals that receive a copy of all System Debug I/O.
ldevs A list of terminal LDEV numbers (logical device numbers), separated by
blanks or commas. A note of caution: remember that the LDEV numbers