STORE and TurboSTORE/iX Products Manual (B5151-90003)

144 Chapter9
When STORE is Complete
Verifying That STORE Files Are Error Free Using VSTORE
offline printing option.
• The ONERR[OR] parameter informs VSTORE what to do if a media error is encountered
while verifying a file. Two options are available. If ONERR=SKIP is specified, then
VSTORE will continue to verify files after an error is encountered. It will print an error
message for any file that it was unable to verify. This is the default. Specifying
ONERR=QUIT causes VSTORE to terminate upon getting a media error. The rest of the
files in the backup will not be verified, and an error message for each file will be issued.
• The DIRECTORY parameter allows for the file system directory on the backup to be
verified. Use of this parameter requires SM or OP capability.
The following are examples of the above parameters:
:VSTORE *T;@.@.@;SHOW
:VSTORE *T;FILE1.MANAGER.SYS;SHOW;ONERR=SKIP
:VSTORE *T;@.@.@;DIRECTORY
NOTE The VSTORE command is not valid for a STORE backup created with the
TRANSPORT parameter.
For a full discussion of all VSTORE command options, refer to the MPE/iX Commands
Reference Manual Volumes 1 and 2 (32650-60238) or refer to Chapter 11, "Restoring Files."
Implementation of the VSTORE options is the same as implementation of the RESTORE
options, except for the ones described above. The VSTORE options are:
• SHOW
• ONERR
• DIRECTORY
• PROGRESS
• COPYACD, NOACD
• TREE, NOTREE
• NODECOMPRESS
• STOREDIRECTORY
• PARTIALDB, TurboSTORE only
• RESTORESET, TurboSTORE only
• MOSET, TurboSTORE only
• NAME, TurboSTORE only