SNA NRJE User/Programmer Reference Manual (30292-90006)

Chapter 6 189
NRJE Manager Intrinsics
NRJELUStatus
Text Reference
The STATUS command also reports the status and state of an LU
session. See the SNA NRJE Node Manager’s Guide for more
information on this command.
10 Session Control Status. Values are as follows:
• 0 = reset
• 1 = waiting for Start Data Traffic
• 2 = normal flow
• 3 = UNBIND received
• 4 = terminate state
11 Monitor Request Status. Values are as follows:
• 0 = rest
•1 =init-self requested
•2 =term-self requested
12 Reserved.
13 Network Service Status. Values are as follows:
• 0 = reset
• 1 = init-self sent
• 2 = active
• 3 = quiesce pending
• 4 = term-self sent
14 Secondary LU status. Values are as follows:
• 0 = reset
• 1 = initiation state
• 2 = normal flow
• 3 = quiesce shut down
• 4 = terminate state
15 LU process identification number (pin)
16–49 Reserved.
Table 6-3 InfoArray Structure
Word Contents and Meaning