SNA NRJE Node Managers Guide (30292-90007)

Chapter 6 89
Commands
NRJECONTROL START
NRJECONTROL START
Starts a workstation or individual LUs, and optionally starts intrinsic
and/or LU tracing.
Syntax
NRJECONTROL STAR[TWS];W[SID]= Wsid
[;CH[AINSIZE]= NumRUs ]
[;LU=LUName[, LUName ]...]
[;TR[ACE]= Type [, Type ][, File ][, Size ]]
Parameters
Wsid Required. The workstation name. This can be up to
eight alphanumeric characters long; the first character
must be alphabetic.
The workstation must have been configured.
NumRUs The number (from 0 through 99) of request units (RUs)
that NRJE is to send before requesting a definite
response from the host.
LUName For NRJE/V, this is the name of the SNA node LU class
you want to start. (Node classes are configured on the
MPE V SNA Configuration: Classes screen.) For
NRJE/XL, this is the configured LU Name (not the NAU
number) of the LU you want to start. (LUs are
configured on the MPE XL SNANode Configuration: PU
and LU Data screen.)
The name can be up to eight alphanumeric characters
long; the first character must be alphabetic. You can
specify a maximum of five
LUNames . If you do not
specify any
LUNames , all LUs that are configured to be
initially started are started.
You cannot start an LU that is already started.