SNA NRJE Node Managers Guide (30292-90007)

88 Chapter6
Commands
NRJECONTROL HALT
An LU-LU session can also be stopped without issuing an
NRJECONTROL HALT in these ways:
• By issuing the NRJE command HALT.
• By issuing the NRJE command STOPWS.
• By issuing the MPE command NRJECONTROL STOP.
• By issuing the MPE command SNACONTROL STOP.
• By the host job entry subsystem; SNA NRJE honors the request.
This can happen at any time.
Text Reference
See NRJECONTROL STOP, HALT, and STOPWS later in this chapter.
NRJEStopWS is the manager intrinsic counterpart of this command; it is
described in the SNA NRJE User/Programmer Reference Manual.