SNA NRJE Node Managers Guide (30292-90007)

Chapter 5 63
SNA NRJE Troubleshooting
The Logging Facility
Example An example of SNA NRJE console logging (logging displayed on the
HP 3000 console) is shown below. In this example, the user followed the
logging configuration guidelines in the SNA Link Services Reference
Manual or the SNA Link/XL Node Manager’s Guide, and turned on
logging for SNA NRJE class CLAS0012.
Note that JES2 is NAU 1 at the host (shown as Remote NAU = 1).
SNA/TRANSPORT Logging
Session Started on node PU3000E
Local NAU = 3, Remote NAU = 1
For SNA NRJE, the user issues an
NRJECONTROL START command. SNA NRJE
LU-LU sessions are started on LUs 1–4.
The remote LU is JES2. Note that the
sessions need not be started in order
according to the NAUs.
@COMPUTERTEXTW = SNA/TRANSPORT Logging
Session started on node PU3000E
Local NAU = 2 , Remote NAU = 1
SNA/TRANSPORT Logging
Local NAU = 1 , Remote NAU = 1
SNA/TRANSPORT Logging
Session started on node PU3000E
Local NAU = 4 , Remote NAU = 1
NRJE Logging LU sessions are active with JES2.
THU, MAR 1, 1984, 10:42 AM
NRJE (R20 ;LU03 ) - LU ACTIVATION COMPLETED. (SC=1226)
NRJE Logging
NRJE (R20 ;LU02 ) - LU ACTIVATION COMPLETED. (SC=1226)
NRJE Logging
NRJE (R20 ;LU01 ) - LU ACTIVATION COMPLETED. (SC=1226)
NRJE Logging
NRJE (R20 ;LU04 ) - LU ACTIVATION COMPLETED. (SC=1226)
After SNA NRJE-to-host activity, the user issues an NRJECONTROL STOP
command. SNA NRJE sends a TERM-SELF to the host for each LU
(class) with an LU-LU session. For each TERM-SELF received, the host
sends an UNBIND to SNA NRJE. SNA NRJE logs receipt of the
UNBIND, SNA Transport logs LU-LU session termination as SNA
NRJE sends positive responses to the UNBINDS, and SNA NRJE logs
LU termination.