SNA NRJE Node Managers Guide (30292-90007)

Chapter 3 45
SNA NRJE Configuration
Configuring SNA NRJE
Figure 3-7 Reader Data Screen Example
Fields
Path
For display only. The NMMGR path for this screen. It
includes the name of the workstation whose virtual
reader you are configuring.
Logical Device
Required. The ldev to which NRJE will spool
submitted jobs. For NRJE/V, you must configure this
ldev into the I/O system by using the SYSDUMP utility
(see the SNA Link Services Reference Manual); this
must be followed by a cold start. This ldev must not be
used for anything else. When the system is rebooted,
NRJE/XL will complete the configuration process for
you.
The ldev number for the NRJE reader should be above
900 to avoid conflicts. Ldevs below 900 may be used by
other devices including virtual terminals. Do not
specify the same reader ldev for workstations that
might be simultaneously active.
SYSDUMP (MPE V only): Configure the ldev as a
type 22 subtype 2 device. The DRT must be