SNA NRJE Node Managers Guide (30292-90007)

Chapter 3 35
SNA NRJE Configuration
Configuring SNA NRJE
fields); no more than 8 workstations can be active at
one time.
File
For display only. The name of the configuration file.
Once you have entered the name of the workstation,
press [f5] [Add] if this is a new configuration, or press
[f6] [Modify] if you are modifying a configuration. This
places you at the NRJE Configuration: Workstation
Data screen.
Workstation Data Screen
After you have selected a workstation, NMMGR displays the NRJE
Configuration: Workstation Data Screen, as shown in Figure 3-4. (You
can go directly to this screen from any screen by typing @NRJE.
wsid in
the command window and pressing
[ENTER].) Here you specify the SNA
node to be associated with the workstation, and data to identify the
workstation to the host.
Figure 3-4 NRJE Workstation Data Screen Example