SNA NRJE Node Managers Guide (30292-90007)

Appendix A 249
Result Codes and Messages
SNA NRJE Logging Messages
9108 MESSAGE: NRJE(!:!): CANNOT CHANGE STATE AND PRIORITY OF
OUTPUT SPOOLFILE. (SPOOLER=!) (LU=9108)
CAUSE: The system procedure NRJESPOOLALTER returned non-zero
status while attempting to reset the output spool file priority and
change its state to OPENED.
ACTION: Contact Hewlett-Packard.
9109 MESSAGE: NRJE(!:!): FAILED TO CHANGE STATE OF AN OUTPUT
SPOOLFILE. (SPOOLER=!) (LU=9109)
CAUSE: The system procedure NRJESPOOLALTER returned non-zero
status while attempting to change the state of an output spool file to
READY.
ACTION: Contact Hewlett-Packard.
9110 MESSAGE: NRJE(!:!): NUMBER OF PIU SEGMENTS RECEIVED = !;
NUMBER OF RU'S = !; NUMBER OF RECORDS = !. (LU=9110)
CAUSE:
ACTION:
9111 MESSAGE: NRJE(!:!): THROUGHPUT = ! RU'S/SECOND; !
RECORDS/SECOND OUTPUT MODE = !. (LU=9111)
CAUSE:
ACTION:
9112 MESSAGE: NRJE(!:!): CPU LOAD = ! CPU MSECS/RU; CPU
LOAD/LINE = ! CPU MSECS/LINE; CPU UTILIZATION = ! CPU BUSY.
(LU=9112)
CAUSE:
ACTION:
10000 MESSAGE: NRJE: XDS ACCESS ERROR WHILE RELEASING
CONSOLE FOR WORKSTATION NUMBER !; PIN=!; (XDS STATUS=!)
(INTR=10000)
CAUSE: While releasing the console the access portid in the NRJE extra
data segment could not be released. May have occurred while a system
shutdown was in progress.
ACTION: Contact Hewlett-Packard.
10001 MESSAGE: NRJE: WARNING: CONSOLE ACCESS PORTID NOT
FOUND IN NRJE XDS FOR WORKSTATION NUMBER !; PIN=!;
(INTR=10001)
CAUSE: A user in the host console facility released the console but the
console access portid could not be found in the NRJE extra data
segment. May have resulted from a workstation terminating just prior
to the user attempting to release the console.