SNA NRJE Node Managers Guide (30292-90007)

Appendix A 209
Result Codes and Messages
SNA NRJE Logging Messages
857 MESSAGE: UNABLE TO READ A CONSOLE MESSAGE FROM THE
“FROM HOST” FILE. (SEV=857)
CAUSE:
ACTION:
858 MESSAGE: HOST CONSOLE IS OPEN. (CI=858)
CAUSE: The CI is ready to accept console commands.
ACTION:
859 MESSAGE: HOST CONSOLE IS RELEASED. (CI=859)
CAUSE: The CI is no longer accepting console commands.
ACTION:
1101 MESSAGE: NRJE(!;!) — WS INDEX NOT IN THE RANGE OF 1 TO 8.
(LU=1101)
CAUSE: NRJELU is not run as a son of NRJEMON.
ACTION: Run NRJEMON which will run NRJELU. If the error still occurs
please report it to Hewlett-Packard.
1102 MESSAGE: NRJE(!;!) — LU INDEX NOT IN THE RANGE OF 0 TO 63.
(LU=1102)
CAUSE: NRJELU is not run as a son of NRJEMON.
ACTION: Run NRJEMON which will run NRJELU. If the error still occurs
please report it to Hewlett-Packard.
1103 MESSAGE: NRJE(!;!) — LU# ! WS NOT ACTIVE. (LU=1103)
CAUSE: NRJELU is not run as a son of NRJEMON.
ACTION: Run NRJEMON which will run NRJELU. If the error still occurs
please report it to Hewlett-Packard.
1104 MESSAGE: NRJE(!;!) — LU NOT IN PENDING STATE. (LU=1104)
CAUSE: NRJELU is not run as a son of NRJEMON.
ACTION: Run NRJEMON which will run NRJELU. If the error still occurs
please report it to Hewlett-Packard.
1105 MESSAGE: NRJE(!;!) — UNABLE TO SET ABORT TRAP. (SEV=1105)
CAUSE:
ACTION:
1106 MESSAGE: NRJE(!;!) — “TO HOST” CONSOLE FILE OPEN FAILED.
(SEV=1106)
CAUSE:
ACTION: