SNA NRJE Node Managers Guide (30292-90007)

206 AppendixA
Result Codes and Messages
SNA NRJE Logging Messages
547 MESSAGE: NRJEMON TERMINATING — MUST BE RUN FROM
NRJE.SYS. (MON=547)
CAUSE: UserName.AcctName of batch job running NRJEMON must be
NRJE.SYS.
ACTION:
549 MESSAGE: NRJE(!): FAILED TO LOCK DUMP’LU LOCAL RIN.
(MON=549)
CAUSE:
ACTION:
565 MESSAGE: NRJE(!): NRJE JOBLOG RECOVERY SUCCESSFUL.
(MON=565)
CAUSE:
ACTION:
566 MESSAGE: NRJE(!): NRJE ENCOUNTERED CORRUPTED KEY FILE
ON JOBLOG DUE TO A PREVIOUS SYSTEM FAILURE. REBUILD OF
JOBLOG IN PROGRESS. (MON=566)
CAUSE:
ACTION:
567 MESSAGE: NRJE(!): FAILED TO OBTAIN JOBLOG AND LOOKUP
TABLE FILE FROM THE CONFIGURATION FILE. (CFG=!) (MON=567)
CAUSE:
ACTION:
568 MESSAGE: NRJE(!): NEW JOBLOG FILE BUILT SUCCESSFULLY.
(MON=568)
CAUSE:
ACTION:
569 MESSAGE: NRJE(!): WARNING: CONFIGURATION ERROR. LOOKUP
TABLE SPECIFIED IN CONFIGURATION FILE COULD NOT BE FOUND.
(MON=569)
CAUSE: NRJE was configured to use a Formid Lookup Table, but the file
does not exist.
ACTION: If you want to use a Lookup Table, create the table file, store it
in the SYS account, and specify the file’s name in the Formid Lookup
Table File field of the NRJE Configuration: Workstation Data Page 2
screen. If you do not want to use a Lookup Table, specify all blanks in
the Formid Lookup Table File field of the Workstation Data Page 2
screen.