SNA NRJE Node Managers Guide (30292-90007)

Appendix A 203
Result Codes and Messages
SNA NRJE Logging Messages
SNA NRJE Logging Messages
Listed below are the SNA NRJE messages that are logged in the log
destination configured for your workstation in the Joblog Data File
field of the NRJE Configuration: Workstation Data Page 2 screen. They
are listed in numerical order according to the number in the message
suffix; if more than one suffix is displayed, the message is listed here
according to the number in the last suffix. These messages are not
written to $STDLIST. Note that online help is not available for these
messages. (See the beginning of this appendix.)
Message Prefixes
LU processes add this prefix to some logging messages:
NRJE( Wsid ; LUClassName )
325 MESSAGE: MISSING PARM FOR ‘RELOAD TABLE’ ROUTINE. WSID=!
(INT=325)
CAUSE:
ACTION:
327 MESSAGE: NRJE(!): CANNOT BUILD JOBLOG DUE TO A
CONFIGURATION ERROR. (CFG=!). (MON=!). (INT=327)
CAUSE:
ACTION:
330 MESSAGE: NRJE(!): CONFIGURATION ACCESS ERROR OBTAINING
LOOKUP TABLE NAME (CFG=!) (INT=330)
CAUSE:
ACTION:
331 MESSAGE: NRJE(!): INTERNAL ERROR WHILE RELOADING TABLE.
(STATUS=!) (FSERR=!) (INT=331)
CAUSE:
ACTION:
332 MESSAGE: FAILED TO OPEN ‘CATALOG.PUB.SYS’. !. (INT=332)
CAUSE:
ACTION:
333 MESSAGE: FAILED TO EXECUTE GENMESSAGE INTRINSIC ON
‘CATALOG.PUB.SYS’ NRJE SET NUM = !. NRJE ERROR =!.
GENMESSAGE ERROR CODE = !. (INT=333)
CAUSE: