SNA NRJE Node Managers Guide (30292-90007)

Appendix A 189
Result Codes and Messages
SNA NRJE Error Messages
ACTION: Scan the data for a keyword that requires an equal sign and a
parameter. Re-enter the information.
707 MESSAGE: INPUT ERROR. (CI=707)
CAUSE: An error has occurred in reading from $STDIN.
ACTION: Re-enter the NRJE subsystem and then re-enter the data. If
this occurs again, contact your HP representative for assistance.
708 MESSAGE: INVALID CHAIN SIZE. (CI=708)
CAUSE: The chain size parameter value is out of range.
ACTION: Correct the chain size parameter value and re-enter data.
709 MESSAGE: INVALID PRIORITY. (CI=709)
CAUSE: The priority value is out of range.
ACTION: Correct the priority value and re-enter data.
710 MESSAGE: INVALID JOB NAME, JOB NUMBER OR USER.ACCOUNT.
(CI=710)
CAUSE: An incorrect job name, job number or
UserName.AcctName was
entered.
ACTION: Job names must begin with a letter and be eight or fewer
alphanumeric characters long. Job numbers are five digit numeric
strings. A
UserName and AcctName each must begin with a letter and be
eight or fewer alphanumeric characters long; a period must separate
the two.
711 MESSAGE: INVALID JOB NAME. (CI=711)
CAUSE: An incorrect job name was entered.
ACTION: A job name must begin with a letter and be eight or fewer
alphanumeric characters long. Correct the information and re-enter the
data.
712 MESSAGE: INVALID JOB NUMBER. (CI=712)
CAUSE: An incorrect job number was entered.
ACTION: A job number is a string of five or fewer numbers. Correct the
information and re-enter the data.
713 MESSAGE: NO SUCH KEYWORD. (CI=713)
CAUSE: An unknown keyword was entered.
ACTION: Correct the information and re-enter the data.
714 MESSAGE: LENGTH OF THE LU NAME IS OUT OF RANGE. (CI=714)
CAUSE: An invalid LU name was entered.